• ModBargains introduces the 2014 Flow Forged Series, VMR V810 by VMR Wheels

      Introducing the 2014 Flow Forged Series from VMR Wheels. The VMR Wheels V810 offers aggressive aesthetics, optimal fitment, and forged wheel performance at a fraction of the price. The V810 is the forefront to our Flow-Forged Series utilizing state of the art flow forming equipment, allowing for a lightweight, single piece monoblock design.


      V810 Features:

      • Flow-Forged Technology
      • ~20% Reduction in Weight
      • Optimized Fitments
      • Single Piece Concave
      • Distinct Undercut Lip
      • 19" 735kg Load Rating
      • 18" 690kg Load Rating




      Standard Finishes
      Hyper Silver with Gloss Clear Coat

      Premium Finishes
      Any Powder Coat Color Offered by VMR Wheels
      Clear Coat available in Matte, Gloss, or Textured

      Available in sizes:

      19x8.5 ET35
      19x8.5 ET45
      19x9.5 ET25
      19x9.5 ET33
      19x9.5 ET45
      19x9.5 ET58
      19x10 ET25

      19" shipment arriving Mid-November
      18" shipment arriving Mid-December








      What do you guys think about the wheels? Input?

      -Frank
      This article was originally published in forum thread: Introducing the 2014 Flow Forged Series, VMR V810 by VMR Wheels started by ModBargains.com View original post
      Comments 15 Comments
      1. Rob.K's Avatar
        Rob.K -
        Great looking wheels!
        Do you have weights for each of the sizes?
      1. Sticky's Avatar
        Sticky -
        Edited slightly and promoted to the front page.
      1. BuraQ's Avatar
        BuraQ -
        Damn, love the options for offset.
      1. marcvtec's Avatar
        marcvtec -
        Awesome
        i need 18 inch offset sizes and weight, this will now be my winter rims lol
      1. Flinchy's Avatar
        Flinchy -
        if they do 18x10 ET25, that'd be delicious.

        ED: awww $#@! they do!

        they only offer it in 'rear' though on modbargains, and all the 'front' offsets/fitments are super conservative haha
      1. ModBargains.com's Avatar
        ModBargains.com -
        VMR didn't have all the weights recorded yet, but here are some confirmed ones:

        1985 ET45 @ 22.0 lbs
        1995 ET58 @ 22.4 lbs
        1995 ET45 @ 22.6 lbs
        1910 ET?? @ 24.0 lbs
        1885 ET45 @ 20.4 lbs
      1. bobS's Avatar
        bobS -
        Nice looking wheels and lighter weight than what you would expect for the price point. These will be popular.
      1. Sticky's Avatar
        Sticky -
        Click here to enlarge Originally Posted by bobS Click here to enlarge
        Nice looking wheels and lighter weight than what you would expect for the price point. These will be popular.
        Agree completely very nice weight for the price.
      1. jbfrancis3's Avatar
        jbfrancis3 -
        Very nice.

        Some quick edits needed in the "Available in Sizes" sections...they all read 19" at the moment.
      1. Linracing's Avatar
        Linracing -
        OMG !! I need some 18x10!! Click here to enlarge
      1. ModBargains.com's Avatar
        ModBargains.com -
        We are accepting pre-orders right now for the remaining inventory left!

        Call me at 714 582 3330 ext 8003 if you have any immediate questions.

        -Frank
      1. ajm8127's Avatar
        ajm8127 -
        Are the hyper silver wheels powder coated? If not, what is the extra cost of powder coating a set of silver wheels? Is there any concern with the heat from the powder coating process annealing the forged aluminum?
      1. ModBargains.com's Avatar
        ModBargains.com -
        Click here to enlarge Originally Posted by ajm8127 Click here to enlarge
        Are the hyper silver wheels powder coated? If not, what is the extra cost of powder coating a set of silver wheels? Is there any concern with the heat from the powder coating process annealing the forged aluminum?
        Hypersilver is the standard painted finish from the factory. Custom powdercoating is available and it's $350.00 to powdercoat a set. There are absolutley no issues with powdercoating spun forged aluminum wheels or any wheels of that matter. The powdercoater that we use is the same powdercoater for VMR, AVANT GARDE, FORGESTAR, and many other wheel companies located here in SOCAL.

        -Frank
      1. spool twice's Avatar
        spool twice -
        Looks like BBS CH-R, well done!
      1. ModBargains.com's Avatar
        ModBargains.com -
        Click here to enlarge Originally Posted by spool twice Click here to enlarge
        Looks like BBS CH-R, well done!
        Yeah very similar design! pretty much the same quality as wel now that it's spunforged!

        -Frank