Close

    • NEW: TiAl Sport M660 turbo inlet piece for Porsche 991.2 9A2B6 3.0

      What you are looking at is a new product currently under development by TiAL Sport which will soon undergo rigorous testing. What is it? A 991.2 9A2B6 3.0 turbo inlet designed for the TiAL M660 turbocharger upgrade.


      This piece improves efficiency and will drop boost pressure by roughly 3-4 psi as measured at the inlet.

      Essentially, it amounts to less heat and more power for those running the M660 turbo upgrade.

      Tuners who know about the piece feel the biggest improvements over the factory design are the TiAL inlet tubes and now these turbo inlet pieces.

      The PorscheBoost.com Project 991.2 Carrera will soon be getting these pieces with the goal of topping 700 horsepower at the wheels. Breaking into the 7XX rwhp range with just the addition of these turbo inlets will speak volumes.

      Expect dyno data and an official release with pricing in the next few weeks. You will of course be able to purchase these pieces directly through the forum or by e-mailing admin@boostaddict.com

      This article was originally published in forum thread: NEW: TiAl Sport M660 turbo inlet piece for Porsche 991.2 9A2B6 3.0 started by Sticky View original post
      Comments 4 Comments
      1. 3DMetal's Avatar
        3DMetal -
        Attachment 60292

        Already have significant improvements with the TiAL 3" Lightweight inlets vs the stock
        1.8" tubes. As the graph shows. ( Measurements taken on a Flow Bench )

        During test runs with the instrumented Carrera, the pressure sensors at the inlet elbow, right before the compressor wheel inlet, report a pressure differential of ~ -3 to -4 psi when operating at 24 psi.

        Sticky : Your car which is flowing more air, will have a larger depression. ( at 31 psi ).

        Once the prototypes are complete, we will bring them in for Flow-bench testing and report differences.

        This will be a significant improvement.

        #DataDriven
      1. Sticky's Avatar
        Sticky -
        Click here to enlarge Originally Posted by 3DMetal Click here to enlarge
        Your car which is flowing more air, will have a larger depression. ( at 31 psi ).
        I can't wait...
      1. nbrigdan's Avatar
        nbrigdan -
        Click here to enlarge Originally Posted by 3DMetal Click here to enlarge
        Already have significant improvements with the TiAL 3" Lightweight inlets vs the stock
        I don't know exactly what the effects of a 70% improvement in flow rate are, but I bet it's damn good.
      1. Sticky's Avatar
        Sticky -
        Click here to enlarge Originally Posted by nbrigdan Click here to enlarge
        I don't know exactly what the effects of a 70% improvement in flow rate are, but I bet it's damn good.
        We shall soon see! Click here to enlarge

        I just want another 30 whp but I'll gladly take more.