Close

    • ESMotor building the 'ultimate Mezger' - Twin 83mm turbos hit 1260 whp at 9400 rpm

      This is going for the title of 'Ultimate Mezger' flat-6 but it has some big shoes to fill. The redline target is 10k rpm but at 9400 rpm and only 20 psi of boost from the twin 83mm turbochargers they are hitting 1261 horsepower at the wheels.


      There is plenty more in it and plenty more will be needed to top the 1564 horsepower to the wheels Protomotive hit on a Dynapack.

      1261 rear wheel horsepower and 762 lb-ft of torque at the wheels at 20 psi is not too shabby:


      Ultimate Mezger though? It's a long way from that at this stage.

      Quote Originally Posted by ESMotor
      It's a 4.1L engine with high rev cam and valvetrain parts. We canceled variable cam timing as well,
      utilizing fixed cam gears.

      This article was originally published in forum thread: ESMotor building the 'ultimate Mezger' - Twin 83mm turbos hit 1260 whp at 9400 rpm started by Sticky View original post
      Comments 9 Comments
      1. TXGold's Avatar
        TXGold -
        This isnít accurate. Some H-Town Hustler already has 1540 and on a real dyno not a generous dynapack hub dyno.
      1. Sticky2's Avatar
        Sticky2 -
        Click here to enlarge Originally Posted by TXGold Click here to enlarge
        This isn’t accurate. Some H-Town Hustler already has 1540 and on a real dyno not a generous dynapack hub dyno.
        Details?
      1. Sticky's Avatar
        Sticky -
        @Emre@Esmotor you can build an amazing motor but can't figure out how to set you vendor account? Click here to enlarge
      1. TXGold's Avatar
        TXGold -
        Click here to enlarge Originally Posted by Sticky2 Click here to enlarge
        Details?
        My buddy BHT post. This dynojet at Driver Source in Houston is considered a heartbreaker by many.
        https://www.facebook.com/blackhorset...5420440228843/
      1. DriverSource's Avatar
        DriverSource -
        Yes, that was on the Dynojet here at DriverSource. We still have a little room to go on boost but stopped there to get the flex-fuel dialed in.
      1. Sticky's Avatar
        Sticky -
        Click here to enlarge Originally Posted by TXGold Click here to enlarge
        This dynojet at Driver Source in Houston is considered a heartbreaker by many
        A heartbreaker Dynojet? That's new.
      1. benzy89's Avatar
        benzy89 -
        Yea. Was gonna say Yumaverick's 4.05L EVOMS 997.1 supposedly hit 1800 WHP on a Mustang
      1. Sticky2's Avatar
        Sticky2 -
        Click here to enlarge Originally Posted by benzy89 Click here to enlarge
        Yea. Was gonna say Yumaverick's 4.05L EVOMS 997.1 supposedly hit 1800 WHP on a Mustang
        What does supposedly mean?
      1. benzy89's Avatar
        benzy89 -
        Click here to enlarge Originally Posted by Sticky2 Click here to enlarge
        What does supposedly mean?
        Supposedly because I'm not putting the effort into finding a dyno sheet, but that's what he advertised in the FS thread for the car on 6Speed